Wuhan University of Technology Innovation is a fiberglass company that integrates research and development, design, and construction. Anti-corrosion is a sub-project within our company’s overall project. Our company has undertaken anti-corrosion projects for large-scale smelters. Engineering , such as Vietnam Anti-corrosion for the 20,000-ton electrolytic copper project Engineering , Myanmar 20,000-ton electrolytic zinc project Anti-corrosion Engineering , domestic Anti-corrosion for large water tanks, anti-corrosion in non-ferrous metal plants, and more.

Targeting Common Problems in Anti-Corrosion Projects

1. Anti-corrosion Engineering Gumming occurs. Pale.

2. Delamination has occurred in the anti-corrosion coating. , delamination on large areas and on small areas, delamination between fiberglass-reinforced plastic and concrete, and delamination between fiberglass-reinforced plastic layers.

3. Corrosion protection exhibits blistering and bulging. , as well as the looseness at the corners.

4. In the case of anti-corrosion coatings, failure to cure or incomplete curing may result in a tacky surface. , or premature curing or excessive brittleness, among other issues.

5. Leakage occurs during use after corrosion protection has been applied.

6. During use, the anti-corrosion coating may become corroded or otherwise damaged.

7. Common safety issues in anti-corrosion projects, such as accidents caused by inadequate ventilation when working in relatively confined spaces.

Welcome to call for inquiries: 027-87294312